top of page
Model: PPE-100
Locker Type: PPE Storage Locker
Compartment Count: 12 compartments
Compartment Size: 350 × 400 × 250 mm
Load Capacity: 20 kg per compartment
Access Control: Card and PIN
Locking Mechanism: Electronic latch
Material: Cold Rolled Steel 0.8 mm
Network and Software: LAN and issue logging
Power Supply: 100-240 V AC
Typical Application: Construction site PPE issue

PPE Storage Locker

PPE storage lockers dispense helmets, gloves, goggles and respirators with size and hygiene control.

PPE storage lockers dispense helmets, safety glasses, gloves, ear defenders and respirators to authorised staff, keeping protective equipment clean, correctly sized and available at the point of use.

Compartments can be assigned personally or shared by shift, and the software tracks issue frequency so replacement schedules follow actual consumption instead of calendar assumptions.

They are used on construction sites, chemical plants, mines and food factories, where consistent PPE availability is both a legal obligation and a practical means of reducing workplace injuries. Size-specific dispensing means each worker receives the correct glove and respirator size without a storekeeper checking stock. Dispensers refill in minutes without a storekeeper.

Model: PPE-100
Locker Type: PPE Storage Locker
Compartment Count: 12 compartments
Compartment Size: 350 × 400 × 250 mm
Load Capacity: 20 kg per compartment
Access Control: Card and PIN
Locking Mechanism: Electronic latch
Material: Cold Rolled Steel 0.8 mm
Network and Software: LAN and issue logging
Power Supply: 100-240 V AC
Typical Application: Construction site PPE issue

Model: PPE-200
Locker Type: PPE Storage Locker
Compartment Count: 24 compartments with size bins
Compartment Size: 400 × 450 × 300 mm
Load Capacity: 30 kg per compartment
Access Control: Card, PIN and QR code
Locking Mechanism: Servo-locking bolt
Material: Cold Rolled Steel 1.0 mm
Network and Software: LAN, Wi-Fi and issue API
Power Supply: 100-240 V AC with surge protection
Typical Application: Chemical plant PPE dispensing

Model: PPE-300
Locker Type: PPE Storage Locker
Compartment Count: 36 compartments with dispenser modules
Compartment Size: 450 × 500 × 350 mm
Load Capacity: 40 kg per compartment
Access Control: Card, PIN, QR and biometric
Locking Mechanism: Motorised lock with hygiene seal
Material: Galvanised Steel 1.2 mm
Network and Software: LAN, Wi-Fi, 4G and EHS integration
Power Supply: 100-240 V AC with UPS
Typical Application: Mining and food factory PPE programmes

bottom of page